❤ Lola! Tango ❤

All you need to know about Lola! Tango Mesh Breasts and appliers :

Taxi to the Lolas store.

There are lots of nice bewbies out on the grid but since I got the Lola! Tango’s I’m going to give ya some tips and tricks for these specific bewbies.


I wanted to add the latest update on the Lolas here cause some of the following won't be of importance anymore!

Yes you read that right! There is now a free script and HUD out that makes you change layers our show bra and top layer together in just one click! No tweaking, editing and hair pulling anymore with this HUD!

If you want the script and HUD you can contact me in-world (Fayechann resident) our ask any group related to boobies.

This is how it works :

Q: How do I install the script?

A: Visit a sandbox and rezz a copy of your tangos to the ground.
Right click and edit them.
On the first page you can change its name if you want.
Open the contents page and draw the "tango multi" script from your inventory into it. There will possibly be a "loading" message; then just wait until a "finished" message appears.
Take the tangos to the inventory and wear them.

Q: Are there more preparations?

A: I started appliers for top and bra levels. You can also set nippels to flat instead of hiding them; they won't peek through the fabric.

Q: How do I switch the layers?

A: Just talk in open chat on channel 6. Use B or b for bra level and T or t for top level. Capital letters switch on; small letters switch off.
Examples:
/6BT        show both bra and top
/6bT        hide bra, show top
/6Bt        show Bra, hide top
/6bt        hide both
You can switch the channel number in the script.

---------------------------------------------------------------------

THANK YOU soooooooooooo much Sandi Moonites for making this script and HUD and sharing it with us for free!


How to add the applier on your Tango’s ?

1. Click on your Tango’s and a menu will appear on the top right corner of your screen.
2. Select “clothing” and then select the one you need for the applier (tank top / bra / dress bra …).
3. Go to your inventory and add our wear the applier you want. It will show on the bottom center of your screen. Click it and the applier will show on your bewbies, YAY!!

Now, if the applier isn’t showing you maybe need to change the type of clothing in your Tango menu.
 
 
The applier doesn’t look right on my bewbies, AAAHH!
 
It’s normal the applier doesn’t fit perfectly with the rest of your outfit most of the time cause there is no standard bewbies size. So you will need to tweak the texture manually to make it fit YOUR Tango’s! This may request some edit scales but NO PANIC we’ll go step by step :

1. Right-mouse-click on your Tango’s and select “edit”.
2. On the menu that appears you choose “select face” and then click on your Tango’s where you see the applied texture.
3. Now you can adjust in the tab "texture" values like “repeats per face” and/our “texture offset” until the texture fits the way you want it.

Wearing multiple appliers (tattoo/bra + clothing) : (see update above!!)

We have 2 different ways to do so and I'm gonna try to explain both methods as good as I can.

First method : 

1. You can do this while your breasts are attached. Right-mouse-click you're bewbies and choose edit. 
2. In edit enable "edit linked parts" and click the "bra layer". It's underneath the top layer so you might need to move that top layer to get better access to it). 
3. When you have a hold on the "bra layer"  you go to the tab "texture" in edit. You see that transparency is set to 100%. Take it down to 0% and you will see the applier appear.
4. If you moved the top layer don't forget to put it back in place, close edit and done *smiley*

Before & After

 Note : I find this method the easiest one and you don't need to delete scripts so you can changes bra's and top's whenever you want without taking your bewbies of *YAY*.
  
Second method :

1. Apply the tattoo our bra texture you want (clothing : dress bra!) and detach your Tango’s.
2. Rezz them on the ground and make a copy! (you never know)
3. Right-mouse-click and select “edit”. Now in edit select “edit linked parts” and select the bra mesh layer (not the top layer) on your rezzed Tango’s. You can see the name of the layer in "edit" under the "general" tab. What I did to get the bra layer was I moved the top layer a bit so I had better access to the bra layer. Don't forget to note down the exact position of the top layer so it's easy to get it back in the exact placeafter you're done with the bra layer!
4. In “edit” go to the tab “content” and delete both textures out of the bra mesh layer. IMPORTANT : after deleting the textures wait until you see a reset message about your Tango’s appear in local chat : "Menu ready for use"!
5. Pick up your Tango’s and move them back in your inventory. Now you can attach them and apply your clothing AND you’re tattoo our bra will show as well (see above image).

Note : My first try was hopeless and I didn't get the hand of it. So I gave up. The second time it took me about 5 tries and one hour later I finally got the result I wanted (but not the bra I wanted cause it wasn't a "bra dress" applier *pouts*) So NEVER give up ..you WILL succeed! *winks*

Note : Is it just me our are most bra appliers made for the "dress top" layer on Lola! Tango's? I find it hard to find a nice bra that can be applied to the "dress bra" layer *sad* So, if I'm missing out on something please, please, let me know!

HELP, the applier doesn't show completely from a distance and it looks like I got holes in my clothing! This was something that drove me nuts to a point I always had my nose in my bewbies so I wouldn't have to deal with those "holes" *laughs*

1. Go to advanced menu at the top left of your screen. If you don't have it on your screen then activate it by going to ME - PREFERENCES - ADVANCED - and enable the "show advanced menu" - click OK.
2. In advanced menu go to "show debug settings" and type in the bar "rendervolumeLODfactor". The default one should be 2.0. I put it on 14 and TADA no holes anymore! Now just close and you're done. Enjoy your perfect view on mesh (not just boobs but also furniture and stuff). 

HELP, my bewbies won't resize and stay invisible! I wanted to add this to the list cause it just came up in a group chat and I didn't know the answer since I never have had this problem yet but you never know.

1. Go to "advanced settings" and "clear group cache"
2. Go to preferences - advanced - clear cache - ok 
3. Now quit sl and log back on and the problem should be resolved. Note that logging in can take some more time when you clear cache and if you have never done this before it can take several minutes.   

This can also help if you don't see an alpha layer, you can't detach something from you're avatar our mesh doesn't re-size well like for instance hair. 

Do the same if you encounter error scripts (yellow triangle show's).